|
Flip Up License Plate Bracket
When you need to get away....Every little bit counts!!!
|
||||||||||
| Flip Up License Plate | ||||||||||
|
||||||||||
A license plate on a typical motorcycle can induce approximately
30 pounds of force/wind drag at 80 MPH.
Never gave it a thought? Hmmmm …………
Our new “Flip Up” license plate Mounting Bracket will eliminate all wind resistance caused by your plate at 70 MPH and above.
This is how our “Flip Up Mounting Bracket” works. On
a typical motorcycle when you reach a speed
of approximately 70 to 80 MPH, our “Flip Up Bracket” automatically flips your plate up horizontal allowing all
drag to be released. When your bike returns to a speed of approximately 25 MPH and below the plate returns to its normal position.
When someone is behind
you and you need to get away!
We stress the word typical because every bike manufacturer mounts the plate in a different
location. Also, depending on how the rider sits, air temperature and many other factors will
create different wind turbulence around the bike and plate area affecting what speed the bracket
will release and flip up as shown. Due to these various factors, it is impossible for us to test on
every bike in every situation or predict exactly what speed the bracket will “Flip Up”. All of our
tests indicate between 70 and 80 MPH and back down to its normal position at approximately
25 MPH at 70 degree Fahrenheit. The “Flip Up” license plate bracket is slightly speed
adjustable to suit your personal taste and bike.
Designed
for the race track and off road use.
How to Order:
$59.95 Each
Please Contact Us To Purchase!!!!
Flip Up Bracket (Shown Below)
|
||||||||||
Easy Installation - Mounts in Minutes on Exisiting Mounting Holes Using Existing Hardware!!!
No Wiring or Drilling!!!!
Works on most models.
The Flip Up License Plate will work on most models when installed properly. For best results, there needs to be the maximum amount of airflow as possible around the license plate itself as shown in the pictures above.
If the frame of your bike completely blocks all airflow, this will not work. The plate needs to have airflow to work!!!!!
Transparent Traction Pads, Tank Protectors - Sold Together, Set Includes Left and Right Tank Pads
$23.95 Per Set - Please Call, Fax, or Email to Order!!!!
Transparent!!!! Will not alter the look of your bike or detract from your bike's appearance!!!!
Easy Installation - Installs in Just Minutes with NO Adhesive!!!
Custom Fit To Your Bike - Why? You Cut to Fit to Your Tank
Removable - Will NOT damage or leave any residue on your bike!!!
Best Appearance on Lighter Colored Bikes
|
||||||||||
| Picture Taken at 1 Foot Away | ||||||||||
|
||||||||||
| Picture Taken at 3 Feet Away | ||||||||||
|
||||||||||
| Picture Taken at 15 Feet Away | ||||||||||
Air Cooled Engines Run Very Hot in the Summer and Hot Engines DO NOT Run Well!!!!!
Our Slip-On Oil Cooler Can Drop Your Oil Temperature by 15 Degrees!!!
Fits on Most Motorcycle Oil Filters
Installs in Seconds - Just Slips Right On!!!!
$59.95 Each
|
||||||||||
| Slip-On Oil Cooler | ||||||||||
|
||||||||||
| Slip-On Oil Cooler Installed on Oil Filter | ||||||||||
|
Our Hours |
|
|
Monday - Friday |
9:00 AM - 5:00 PM |
